25 Best Floor Jacks in 2021 (All Price Ranges)

One of the most common and useful tools in any garage is a floor jack. Whether you are a professional mechanic or the type of person that likes to work on your own car chances are you own one (or several). Sure, having a two-post lift would be nice in your home garage but they are not practical for several reasons. They are expensive and many people do not have space for one. Fortunately, there are floor jacks available in a variety of price ranges and are more than sufficient for most vehicle repairs. This buyer’s guide will help you choose the best floor jack for whatever simple or extensive repair you need it for, here at Mechanic Approved we have you covered!

Floor jacks ft image

Why do I need a floor jack? If you are like us, you are probably a professional mechanic or a home DIY gear head. A floor jack is an essential tool like sockets and wrenches! You will need one for many repairs like changing brakes, changing shocks, and tire changes, none of which can be done without one unless you have a floor lift. As for choosing the Best Floor Jack, that largely depends on the vehicles you own (or work on). Below is a list of floor jacks that can lift 2-tons all the way up to 10-tons, so it is safe to say there is one available for your needs and budget.

This list will include mostly the everyday floor jack one might use for an average vehicle (truck, SUV, sedan) however if you are looking for a low profile floor jack for a sports car or race car you can check out our other article here, “Best Low Profile Floor Jacks“. Now without further ado, here are the Best Floor Jacks for all price ranges!

Notice

As you proceed through our list you will notice that the products will be broken up into two separate groups, “Best 5 to 10 Ton Floor Jacks”, and “Best 2 Ton Floor Jacks”. This is to help narrow your choices down to the floor jack that suits you and your garage the best! Additionally, each group will include what we think to be the “Best Overall” for the said category.

Name of Product

Image of Product

Descripiton

Price Range

Full Reveiw

1. Torin Big Red T80501 5-Ton Heavy Duty Long Frame Floor Jack

Torin Big Red T80501 5-Ton Heavy Duty Long Frame Floor Jack

Lift Range: 5-7/8” to 22”

Load Capacity: 5 tons

Around $570

2. ATD 7391 10-Ton Floor Jack

ATD 7391 10-Ton Floor Jack

Lift Range: 7”-27”

Load Capacity: 10 tons

Around $1060

3. Hein-Werner HW93660 10-Ton Hydraulic Service Jack (Best Overall)

Hein-Werner HW93660 10-Ton Hydraulic Service Jack

Lift Range: 6-3/4” to 25”

Load Capacity: 10 tons

Around $2500

4. K Tool 63155A 5-Ton Floor Jack

K Tool 63155A 5-Ton Floor Jack

Lift Range: 6-3/10” to 22”

Load Capacity: 5-tons

Around $480

5. Sunex 6609 10-Ton Hydraulic Floor Jack

Sunex 6609 10-Ton Hydraulic Floor Jack

Lift Range: 6-1/4” to 22-1/4”

Load Capacity: 10-tons

Around $1125

6. Blackhawk BH6107 Fast Lift 10-Ton Floor Jack

Blackhawk BH6107 Fast Lift 10-Ton Floor Jack

Lift Range: 6-7/8” to 27”

Load Capacity: 10 tons

Around $1070

7. Performance Tool W1645

Performance Tool W1645

Lift Range: 3-1/2” to 20”

Load Capacity: 3.5 tons

Around $200

8. Sunex 6603ASJ 3-Ton Aluminum Floor Jack

Sunex 6603ASJ 3-Ton Aluminum Floor Jack

Lift Range: 3.8” to 19.3”

Load Capacity: 3 tons

Around $305

9. K Tool 63133A 3.33 Ton Low Profile Service Jack

K Tool 63133A 3.33 Ton Low Profile Service Jack

Lift Range: 3-3/4” to 21-3/4”

Load Capacity: 3.33 tons

Around $160

10. Blackhawk B6350 3.5 Ton Fast Lift Floor Jack (Best Overall)

Blackhawk B6350 3.5 Ton Fast Lift Floor Jack

Lift Range: 5-1/8” to 21-1/2”

Load Capacity: 3.5 tons

Around $150

11. Hein-Werner HW93652 Heavy Duty 3-Ton Service Jack

Hein-Werner HW93652 Heavy Duty 3-Ton Service Jack

Lift Range: 5” to 23-1/2”

Load Capacity: 3 tons

Around $505

12. Torin TCE 83508 3.25 Ton Low Profile Floor Jack

Torin TCE 83508 3.25 Ton Low Profile Floor Jack

Lift Range: 3-7/8” to 21-1/16”

Load Capacity: 3.25 tons

Around $265

13. Torin Big Red T83002 3 Ton Pro Series Hydraulic Floor Jack

Torin Big Red T83002 3 Ton Pro Series Hydraulic Floor Jack

Lift Range: 5-1/2” to 20-1/2”

Load Capacity: 3 tons

Around $140

14. Arcan XL35 3.5 Ton Low-Profile Professional Service Floor Jack

Arcan XL35 3.5 Ton Low-Profile Professional Service Floor Jack

Lift Range: 3-1/2” to 21-3/8”

Load Capacity: 3.5 tons

Around $150

15. Torin A94117B 3 Ton Hydraulic Floor Jack

Torin A94117B 3 Ton Hydraulic Floor Jack

Lift Range: 5-7/8” to 20-7/8”

Load Capacity: 3 tons

Around $95

16. Sunex 6602LP 2 Ton Low Rider Steel Service Jack

Sunex 6602LP 2 Ton Low Rider Steel Service Jack

Lift Range: 2.75” to 24”

Load Capacity: 2 tons

Around $235

17. K Tool 63098A 2-Ton Aluminum Service Jack

K Tool 63098A 2-Ton Aluminum Service Jack

Lift Range: 3-1/4” to 18-1/2”

Load Capacity: 2 tons

Around $205

18. K Tool 63101A 2-Ton Service Jack

K Tool 63101A 2-Ton Service Jack

Lift Range: 3” to 19-15/16”

Load Capacity: 2 tons

Around $125

19. Performance Tool W1611

Performance Tool W1611

Lift Range: 5-1/4” to 15”

Load Capacity: 2.25 tons

Around $70

20. Big Red T84025B 2.5 Ton Aluminum Low-Profile Floor Jack

Big Red T84025B 2.5 Ton Aluminum Low-Profile Floor Jack

Lift Range: 3-15/16” to 18-15/16”

Load Capacity: 2.5 tons

Around $195

21. Powebuilt 640910E 2.5 Ton High Lift Floor Jack

Powebuilt 640910E 2.5 Ton High Lift Floor Jack

Lift Range: 5-7/8” to 21”

Load Capacity: 2.5 tons

Around $110

22. JEGS 79000 2-Ton Floor Jack

JEGS 79000 2-Ton Floor Jack

Lift Range: 5-1/8” to 13”

Load Capacity: 2 tons

Around $30

23. Sunex 6602ASJ 2-Ton Aluminum Floor Jack

Sunex 6602ASJ 2-Ton Aluminum Floor Jack

Lift Range: 3-1/2” to 20”

Load Capacity: 2 tons

Around $240

24. Hein-Werner HW93642 2-Ton Hydraulic Service Jack

Hein-Werner HW93642 2-Ton Hydraulic Service Jack

Lift Range: 4-1/2” to 20-1/4”

Load Capacity: 2 tons

Around $405

25. Powerbuilt 240076 2.5 Ton Fast Lift Floor Jack (Best Overall)

Powerbuilt 240076 2.5 Ton Fast Lift Floor Jack

Lift Range: 3” to 19-1/2”

Load Capacity: 2.5 tons

Around $185

Here Are The Best Floor Jacks

Best 5 to 10 Ton Floor Jacks

1. Torin Big Red T80501 5-Ton Heavy Duty Long Frame Floor Jack

Torin Big Red T80501 5-Ton

Shop Amazon

Key Specifications:

  • Weight and Material: Steel
  • Load Capacity: 5 tons
  • Lift Range: 5-7/8” to 22”
  • Warranty: 1-year
  • Foot pedal for quick set up
  • Long frame
  • Complies with all ASME and PASE safety standards
  • Around $570

Based out of China, the Shanghai Tongrun Import and Export company is part of the Jiansu Tongrun Machinery and Electrical Group Company. Founded in 1954, the company produces a wide range of industrial and automotive machinery. Their products are sold worldwide and have a reputation for quality.

A well-known brand in the automotive repair business, it should come as no surprise to see a Torin jack on this list. The Big Red long frame 5-ton floor jack is a must-have tool for any repair shop that deals with larger vehicles that are too heavy for a standard 3-ton floor jack. Not to mention, it is the cheapest model available in this category. Lift range is decent with a 5-7/8” clearance and maximum lift height of 22”.

The long frame aids in placement under the vehicle with a foot pedal to raise the saddle to the lift point. In addition, two large steel casters (front swivel) help to maneuver it into place and a wide frame provide added stability while under load. As expected, the Big Red 5-ton floor jack has overload and safety valves that prevent use beyond their rated capacity and both models comply with all ASME and PASE safety standards.

With that said, the Big Red T80501 is a good value for the money. While it may not be as durable as some of the other heavy-duty jacks here, it is the cheapest and parts like seal rebuild kits are readily available.

2. ATD 7391 10-Ton Floor Jack

ATD ATD-7391 10 Ton Service Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 293lbs
  • Load Capacity: 10 tons
  • Lift Range: 7”-27”
  • Warranty: 1-year
  • Available with 5-ton and 10-ton load capacity
  • Foot pedal for quick setup
  • Long frame
  • Complies with all industry safety standards
  • Around $1060

Founded in 1977, ATD has been focused on providing professional tools at affordable prices.

Another company that is well known in the auto repair business is ATD Tools and the 7391 was built with daily use in mind. There are a lot of things to like, starting off with a maximum lift range of 27” which is on the higher end for a 10-ton jack. It also features a welded hydraulic pump for increased strength and durability and wiper seals help keep dirt from getting into the pistons. The front and rear casters have ball bearings that aid in mobility which is helpful when moving around a 200-300lb floor jack. A foot pedal makes the initial setup easier and the handle can lock into three different positions with an independent release knob. Lastly, it meets all ASME PASE 2019 safety standards and has a bypass valve that prevents use beyond the rated 10-ton capacity.

Overall, both are well-built and are designed to handle the rigors of shop use. While on the higher end of the price range for 5 to 10-ton floor jacks, they are of good quality, and like the Big Red model above, hydraulic rebuild kits are available.

3. Hein-Werner HW93660 10-Ton Hydraulic Service Jack (Best Overall)

Hein Werner HW93660 10 Ton Long Chassis Service Jack

Shop Amazon

Key Specifications:

  • Weight and Material: 420lbs
  • Load Capacity: 10 tons
  • Lift Range: 6-3/4” to 25”
  • Warranty: 2 years
  • Made in the USA
  • Good warranty
  • Durable and well-constructed
  • Around $2500

Part of the Shinn Fu America (SFA) family of companies, they have over 40 years of experience making hydraulic lift equipment. They are one of the leading distributors of lifts and floor jacks in the US and Canada.

Another established name in the business is Hein-Werner. They have a reputation for building quality products that are made to last. The 93660 10-Ton jack is no exception to this rule. Not to mention, they are the only jacks reviewed here that are made in the USA. This jack is a beast and is by far the heaviest 10-ton jack weighing 420lbs. However, that added weight is due to its heavy-duty construction and features like a cast lift arm for added strength. A large swivel saddle helps keep the load stabilized and ball bearing casters aid in moving this guy around. Dual pistons aid the lifting process with a maximum lift height of 25” which is on the higher end for a 10-ton jack. A release knob adds some extra control when lowering the vehicle and a sealed hydraulics unit helps keep water and contaminants out.

While roughly twice the price of other 10-ton jacks, the Hein-Werner HW93660 is arguably the most durable. Part of that is due to the fact it weighs 100lbs more than most models here. This was built to last and is an example of “made in the USA” means quality. Backed by a 2-year warranty, if you want the best and made in the USA the HW93660 is about as good as it gets.

4. K Tool 63155A 5-Ton Floor Jack

K Tool International 5 Ton Blue HD Service Jack KTI63155A

Shop Amazon

Key Specifications:

  • Weight and Material: Steel
  • Load Capacity: 5-tons
  • Lift Range: 6-3/10” to 22”
  • Warranty: 2 years
  • Durable and well-constructed
  • Good warranty
  • Around $480

Another popular brand in many garages is K-Tool. This is not surprising as they are built for professional use. At $480, it is arguably the best value out there especially when you consider the fact they come with a 2-year warranty. It features heavy-duty steel construction for added strength and durability. Swivel rear casters aid in mobility and positioning, a nice feature when moving around a heavy floor jack. A quick start double pump makes the initial setup even easier. Lift range is good, with a maximum height of 22”. As expected, safety was not overlooked and includes a bypass valve that prevents use beyond its rated capacities.

As noted above, it is a good value for the money and comes with a 2-year warranty. It is well-built with durability and professional use in mind.
About K Tools: Since 1984, K Tool International has been focused on selling tools for the automotive professional with an emphasis on durability and affordability. Like Performance Tool, their products are a frequent sight in many shops today.

5. Sunex 6609 10-Ton Hydraulic Floor Jack

Sunex 6609 10-Ton Standard Floor Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 338lbs
  • Load Capacity: 10-tons
  • Lift Range: 6-1/4” to 22-1/4”
  • Warranty: 1-year
  • Solid Construction
  • Good safety features
  • Quick lift
  • Around $1125

Another respected name in the auto repair business, the Sunex 6609 heavy-duty floor jack will take care of most of your lifting needs. It has a good lift range of 6-1/4” and a maximum height of 22”. The hydraulic unit features a uni-weld construction for added strength and durability. A foot pedal aids in raising the arm to the vehicle’s lift point. All four casters feature ball bearings for added mobility and a rear kick plate helps turn the jack in tight spaces. A release knob on the handle operates independently, allowing for more control when lowering the vehicle. Lastly, as with most Sunex products, there is an emphasis on safety with a bypass valve that prevents use beyond its rated capacity and overextension of the piston.

While slightly more expensive than other jacks in this price range, Sunex jacks are designed with quality and durability in mind.

6. Blackhawk BH6107 Fast Lift 10-Ton Floor Jack

Blackhawk BH6107 Hydraulic Fast Lift Service Jack

Shop Amazon

Key Specifications:

  • Weight and Specifications: Steel
  • Load Capacity: 10 tons
  • Lift Range: 6-7/8” to 27”
  • Warranty: 1-year
  • Heavy-duty frame
  • Good lift range
  • Large saddle
  • Around $1070

Part of the SFA family, the Blackhawk BH6107 is another solid option for shop use. It has a good lift range of 6-7/8” to 27” which is one of the best in this category. Load capacity of 10 tons will lift just about any vehicle. A rolled steel frame provides extra durability and strength. Like most jacks in this category, it has bypass and overload valves to protect the hydraulics and prevent use beyond its rated capacity. Lastly, a metered knob on the handle allows for precise control when lowering the vehicle.

All said and done, the Blackhawk BH6107 is worth considering where high lift range and load capacity are needed.

Best 3 Ton Floor Jacks

7. Performance Tool W1645

Performance Tool W1645 3 Ton

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 100lbs
  • Load Capacity: 3.5 tons
  • Lift Range: 3-1/2” to 20”
  • Warranty: 1-year
  • Good lift capacity
  • Solid Construction
  • Low profile frame
  • Around $200

One of several brands of the Wilmar Corporation was founded in 1971 and based in Renton, WA. They offer a wide variety of tools for the automotive professional. As such, it’s not uncommon to see PT products in a shop near you.

Another workhorse that can lift a few tons is the Performance Tool W1645. This is a solid, heavy-duty jack with an impressive 3.5-ton load capacity with a respectable lift range of 3-1/2” to 20” as well. This is sufficient to lift most vehicles and many light trucks. In addition, it has a very low clearance of just 3.5” which is perfect for getting under most sports cars or lowered vehicles. Other features are a padded saddle which helps provide some extra stability when raising the vehicle. A double pump piston allows it to reach most lift points within a few pumps and an “overload bypass valves” prevent use beyond its rated capacity.

For $200, this a good shop jack that can be used on a wide range of vehicles with low clearance. It is one of the heaviest models in this category but it can lift 3.5 tons. A solid option where versatility is important at a reasonable price, the Performance Tool is built to last.

8. Sunex 6603ASJ 3-Ton Aluminum Floor Jack

Sunex 6603ASJ 3 Ton Aluminum Lift

Shop Amazon

Key Specifications:

  • Weight and Material: Aluminum, 58lbs
  • Load Capacity: 3 tons
  • Lift Range: 3.8” to 19.3”
  • Warranty: 1-year
  • Lightweight
  • Good build quality
  • Portable
  • Around $305

It should be no surprise to see another Sunex model on the list. The 6603ASJ is worth mentioning due to the fact it was built with portability in mind thanks to its aluminum construction. Weighing just 58lbs, this is one of the lightest 3-ton jacks on the market. It has a good set of features like a thick aluminum frame and a reinforced lift arm for added strength and durability. Large wheels allow it to roll effortlessly on the floor and side handles aid in placement under the vehicle. A padded handle and rubber-coated saddle provide some extra protection as well. Lift range is quite good from 3.8 to 19.3” and the 3-ton capacity will lift most vehicles and light trucks.

This is one of the lightest 3-ton jacks out there and if portability is important, the 6603ASJ is difficult to beat. Thanks to its solid construction, this one can handle some shop use and is perfect for a mobile or home mechanic. While it is on the higher end of the price range for a 3-ton jack, it is one of the best aluminum models out there.

9. K Tool 63133A 3.33 Ton Low Profile Service Jack

K Tool International 3.33 Ton

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 97lbs
  • Load Capacity: 3.33 tons
  • Lift Range: 3-3/4” to 21-3/4”
  • Warranty: 2 years
  • Good lift range
  • Built for shop use
  • Cheap
  • 2-year warranty
  • Around $160

It should be no surprise to see another K Tool jack on the list as they have a reputation for making quality products with affordability in mind. The 63133A is no different and has an impressive set of features starting with its load capacity of 3.33 tons and lift range of 3-3/4” to 21-3/4”. Both of these are good in the 2-3 ton category. In addition, it can get under most lowered vehicles and sports cars. While this is a heavy jack at 97lbs, it is fairly mobile thanks to the rear swivel casters. A padded handle and rubber-coated saddle protect the vehicle from damage.

Overall, this is one of the best values for the money. Being the “XD” or heavy-duty line, the 63313A was built with durability in mind and is backed by a 2-year warranty. For $160 there is little to not like about this jack.

10. Blackhawk B6350 3.5 Ton Fast Lift Floor Jack (Best Overall)

Blackhawk Black Red floor jack

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 85lbs
  • Load Capacity: 3.5 tons
  • Lift Range: 5-1/8” to 21-1/2”
  • Warranty: 1-year
  • Good value for the money
  • High load capacity
  • Rugged construction
  • Around $150

The Blackhawk B6350 is another solid, rugged, and well-priced option from SFA. It should be no surprise it is one of the most popular floor jacks on Amazon. It has a good lift range up to 21-1/2” and a 3.5-ton load capacity. The rubber-coated, swivel saddle makes it easy to place under the vehicle. However, at 4” it is a bit smaller than those on most full-sized jacks. A safety valve prevents use beyond its rated capacity.

Overall, this a good jack for the money and one of the most affordable 3.5-ton models out there. While it is well-built, this is more oriented towards home use as opposed to a busy repair shop. Another thing to point out is the high clearance of 5-1/8” which means the B6350 is not ideal for lowered vehicles. With that said, it is a good value for the money and is perfect for home use.

11. Hein-Werner HW93652 Heavy Duty 3-Ton Service Jack

Hein-Werner HW93652 Blue Heavy Duty Service Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 107lbs
  • Load Capacity: 3 tons
  • Lift Range: 5” to 23-1/2”
  • Warranty: 2 years
  • Made in the USA
  • Built to last
  • Good Warranty
  • Around $505

Another offering by SFA, Hein-Werner jacks are known for their quality and are made in the USA. There is a lot to like about the HW96352 from its load capacity to a 23-1/2” maximum lift height, which is among the best of any jack in the 3-ton category. Other features are a cast-iron lift arm and pump base for added strength and durability. A large 6-3/4” saddle provides for extra stability underneath the vehicle. In addition, the HW96352 also features a one-piece handle that eliminates bending and allows for more control when lifting and lowering the car.

While this is the most expensive 3-ton jack on the list, Hein-Werner jacks are arguably the most durable and rugged floor jacks available. They come with a 2-year warranty and are assembled here in the US.

12. Torin TCE 83508 3.25 Ton Low Profile Floor Jack

TCE TCE83508 Torin Hydraulic Low Profile Floor Jack

Shop Amazon

Key Specifications:

  • Construction and Material: Steel, 100lbs
  • Load Capacity: 3.25 tons
  • Lift Range: 3-7/8” to 21-1/16”
  • Warranty: 2 years
  • Designed for shop use
  • Good warranty
  • Solid Construction
  • Around $265

As the name suggests, Torin Commercial Equipment (TCE) jacks were designed with the professional in mind. The TCE 83508 is no exception to this rule and it is another solid and well-built jack that can handle daily use in a busy repair shop. It has a good clearance of 3-7/8” and a low-profile chassis so it can get under most vehicles. Maximum lift range is decent as well at 21-1/16” along with a load capacity of 3.25 tons. Other features are a sealed cast iron pump base with dual pistons for faster rising action. The reinforced lift arm and thick u channel side plates add extra durability. A heavy-duty foam padded two-piece handle provides extra grip when lifting the vehicle. For added safety, bypass valves prevent use beyond its rated capacity, and it complies with all applicable industry safety standards.

As the name TCE implies, the 83508 was built for shop use. It is well-constructed with good safety features, clearance, and lift capacity. Not to mention, it is backed by a 2-year warranty. If durability is important when choosing which jack to buy, this is one worth considering.

13. Torin Big Red T83002 3 Ton Pro Series Hydraulic Floor Jack

BIG RED T83002 Torin Pro Series Hydraulic Floor Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Steel
  • Load Capacity: 3 tons
  • Lift Range: 5-1/2” to 20-1/2”
  • Warranty: 1 year
  • Good value for the money
  • Durable
  • Ideal for home use
  • Around $140

Another Torin product, this jack is one of the most economical 3-ton full-sized jacks out there costing $140. It has a lift range of 5-1/2” to 20-1/2” so it is ideal for most tasks. However, due to the high minimum clearance, the Blackhawk B6350 is not a good choice for lower vehicles. It has two large steel casters and the front swivel for added mobility. A wide stance provides extra stability under load and safety bypass valves prevent use beyond its rated 3-ton capacity.

Overall, this is a good jack for the money and is perfect for home use. For a repair shop, the TCE83508 will hold up better as the Big Red jacks are more for home or light use. Other than that, for under $150 this is a jack worth considering.

14. Arcan XL35 3.5 Ton Low-Profile Professional Service Floor Jack

Arcan 3 and a half -Ton Low-Profile Professional Service Floor Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Steel
  • Load Capacity: 3.5 tons
  • Lift Range: 3-1/2” to 21-3/8”
  • Warranty: 1-year
  • Long reach, low-profile deck
  • Good price
  • High load capacity
  • Around $150

It should be no surprise to see an Arcan jack on this list. They are one of the more established companies in the automotive repair business with a reputation for making quality products. The XL35 has quite a few features that make it a good choice. For one, the load capacity of 3.5 tons and 21-3/8” lift range are on the upper end of jacks in this category. It also has a long, 3.5” deck that can access the lift points on many lowered cars. This is something that tire or performance shops will appreciate. A foam-padded handle and rubber-coated saddle provide extra grip and stability. Like most Arcan jacks, there is an emphasis on safety with overload valves to prevent use beyond its rated 3.5-ton capacity and it complies with ASME PALD standards for lifting equipment.

This is another model worth considering due to its high load capacity, low clearance, and price range and is difficult to beat for $150

15. Torin A94117B 3 Ton Hydraulic Floor Jack

Torin A94117B BlackJack Hydraulic Trolley

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 46lbs
  • Load Capacity: 3 tons
  • Lift Range: 5-7/8” to 20-7/8”
  • Warranty: 1-year
  • Good lift range and load capacity
  • Ideal for vehicles with higher ground clearance
  • Reasonably priced
  • Around $95

This is probably the best budget 3-ton jack costing around $100 and is suitable for light trucks where the higher lift range is needed. The Torin A94117B features a saddle extension which gives it a maximum lift height of 20-7/8” which is quite good for a jack costing under $100. It also has two large swivel casters and a handle that can rotate 360 degrees to get under tight spots. The frame is constructed with heavy-duty steel for long-term durability and has a bypass valve to prevent use beyond its rated 3-ton capacity.

While this is not designed to be used in a shop, it is a solid budget option if you own a light truck. It is portable with a good lift range and is ideal for minor repairs like changing a tire.

Best 2 Ton Floor Jacks

16. Sunex 6602LP 2 Ton Low Rider Steel Service Jack

Sunex 6602LP Low Rider Steel Service Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 104lbs
  • Load Capacity: 2 tons
  • Lift Range: 2.75” to 24”
  • Warranty: 1-year
  • Low clearance
  • Good lift range
  • Solid construction
  • Great set of safety features
  • Around $235

Where lift range and low clearance are important, the Sunex 6602LP is the one to get. It features a low 2.75” clearance and a long 18” low deck that can access those difficult to reach lift points on the lowest of vehicles. The lift range of 24” is also impressive, meaning it can lift some light trucks as well. Rapid rise technology enables the 6602LP to reach maximum height in just seven pumps. Other features are a quick release two-piece handle that provides some extra leverage and easy storage. Safety has not been overlooked either with safety valves that prevent use beyond its rated 2-ton capacity, and it complies with all industry safety standards.

While on the higher end of the price range for a 2-ton jack, the Sunex 6602LP is the lowest profile jack on this list. This makes it ideal for anyone with a lowered car where many jacks may not be able to get under the vehicle. Overall, it is solid, well-built, and able to hold up to shop use as well.

17. K Tool 63098A 2-Ton Aluminum Service Jack

K Tool International 2 Ton Aluminum Service Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Aluminum, 42lbs
  • Load Capacity: 2 tons
  • Lift Range: 3-1/4” to 18-1/2”
  • Warranty: 2 years
  • Lightweight
  • Durable for an aluminum jack
  • 2-year warranty
  • Around $205

Another quality offering by K Tool, the 63098A is the lightest floor jack reviewed here. However, light-weight does not come at the expense of quality. At 42lbs, this was designed with portability in mind while being able to handle some shop use. This jack is perfect for a home or a mobile mechanic where hauling around a heavy steel jack is not practical. Other features to like are the side handles which makes it easy to carry and place under the vehicle. The two-piece padded handle and rubber saddle provide extra grip and protection. Lift range is decent from 3-1/4” to 18-1/2” which is sufficient to get under most vehicles.

Overall, this is one of the most portable jacks out there weighing just 42lbs and is perfect for lighter vehicles. It is also the only aluminum jack reviewed that comes with a 2-year warranty. While the 63098A is not going to be as durable as a similar steel model, it makes up for it in weight savings and is one of the better aluminum jacks out there.

18. K Tool 63101A 2-Ton Service Jack

K Tool International 2 Ton KTI63101A

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 69lbs
  • Load Capacity: 2 tons
  • Lift Range: 3” to 19-15/16”
  • Warranty: 2 years
  • Good budget jack
  • Well-constructed
  • 2-year warranty
  • Around $125

Coming from the K Tool XD line, this is as about as affordable as it gets for a shop jack. The 63101A also has a low 3” clearance to get under many lowered sports cars and a 19-15/16” maximum lift height. The heavy-duty frame was designed with durability and stability in mind. Swivel rear casters provide smooth rolling and positioning under the vehicle. Safety features like a bypass valve prevent use beyond its rated 2-ton capacity and the quick lift pump allows access to the vehicle’s lift points with ease.

All said and done, this arguably the most affordable shop-quality jack at $125. Not to mention, it is one of the lighter full-sized steel models at 69lbs. Also, being the XD line the 63101A comes with a 2-year warranty and will work equally well in a professional or home garage.

19. Performance Tool W1611

Performance Tool W1611 Trolley Jack with Case - 2.25 Ton

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 30lbs
  • Load Capacity: 2.25 tons
  • Lift Range: 5-1/4” to 15”
  • Warranty: 1-year
  • Small and portable
  • Cheap
  • Lightweight
  • Around $70

One of the smallest jacks on the list, the Performance Tool W1611 was designed with portability in mind weighing just 30lbs. Of course, this is not a heavy-duty jack and was designed with light-duty, home use in mind despite being able to lift 2-1/4 tons. In addition, it only has a maximum lift height of 15”. However, it is useful for smaller repairs like a tire change, brake pads, or oil change.

The main feature of the W1611 is its portability. This is a good option if you need to do a roadside repair or need a jack to take to the track for changing out your wheels. It is small, compact, and comes with a plastic carry case. With that said, if you just need to do some light repairs or want something portable, this is probably the best option out there for under $100.

20. Big Red T84025B 2.5 Ton Aluminum Low-Profile Floor Jack

BIG RED T84025B Torin Hydraulic Low Profile Aluminum and Steel Racing Floor Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Aluminum, 60lbs
  • Load Capacity: 2.5 tons
  • Lift Range: 3-15/16” to 18-15/16”
  • Warranty: 1-year
  • Good load capacity for an aluminum jack
  • Lightweight
  • Portable
  • Around $195

The Big Red T84025B is another solid option where portability is important when choosing a floor jack. At 60lbs, it is one of the lighter full-sized jacks with dual side handles that make it easy to transport and place under the vehicle. The lift range of 2.5 tons is on the higher end for the aluminum models so this will be able to lift most passenger cars and light trucks. A foam handle prevents damage to the vehicle when in use and can reach maximum lift height in just seven pumps. Lastly, overload valves prevent use beyond its rated capacity.

This is definitely one of the more portable jacks out there weighing in at 60lbs and has a decent load capacity of 2.5 tons. While this is a decent quality jack, the Big Red T84025B is more oriented towards home use as opposed to a professional garage.

21. Powebuilt 640910E 2.5 Ton High Lift Floor Jack

Powerbuilt 640910E High Lift 2 and a half -Ton Service Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 51lbs
  • Load Capacity: 2.5 tons
  • Lift Range: 5-7/8” to 21”
  • Warranty: 1-year
  • Good lift range
  • Light for a steel jack
  • Affordable
  • Around $110

Based out of California and founded over 40 years ago, Powerbuilt tools are designed with the professional and home mechanic in mind. All products are designed to meet all applicable safety standards and the company prides itself on providing outstanding customer service.

The Powerbuilt 640910E is probably the best budget jack out there in terms of features starting off with a 2.5-ton load capacity. It has a good lift range of 21” despite its small size, making it suited for vehicles with higher ground clearance. Heavy-duty rear swivel casters and a knurled handle aid in positioning under the vehicle and one pump will raise the saddle to chassis in most cases. The 640910E meets all applicable safety standards and has an overload valve to prevent use beyond its rated capacity. For a budget jack with decent features and a good lift range, this is one of the best options in this price range.

22. JEGS 79000 2-Ton Floor Jack

JEGS 79000 2-Ton Hydraulic Utility Floor Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 20lbs
  • Load Capacity: 2 tons
  • Lift Range: 5-1/8” to 13”
  • Warranty: 1 year
  • Cheap
  • Lightweight
  • Around $30

This is probably the cheapest wheeled jack out there so don’t expect any miracles. Obviously, the JEGS 79000 was not intended for heavy-duty use but it will be sufficient for something minor like changing a tire and provide more stability than a scissor jack. The maximum lift height of 13” will be insufficient for some passenger cars and most trucks but that can be expected. However, weighing just 20lbs and costing $30 this is the cheapest jack out there and is better than most OEM jacks that come with a vehicle.

23. Sunex 6602ASJ 2-Ton Aluminum Floor Jack

Sunex Tools 6602ASJ Aluminum Service Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Aluminum, 50lbs
  • Load Capacity: 2 tons
  • Lift Range: 3-1/2” to 20”
  • Warranty: 1-year
  • Good build quality
  • Lightweight
  • Good safety features
  • Around $240

This is another quality offering from Sunex Tools and one of the better aluminum jacks on the market. As expected, this was designed to be portable, weighing just 50lbs. However, this a good quality jack, and the 6602ASJ has quite a few features. The 3-1/2” to 20” lift range is on the higher end for an aluminum jack and it can get under most vehicles. A reinforced lift arm and padded saddle help stabilize the load when lifting the vehicle. Dual-piston pumps can raise the saddle to load with ease. Side handles aid in placement and makes it easy to carry around. Ball-bearing swivel casters and wide front wheels enable the 6602ASJ to roll effortlessly. Overload and bypass valves prevent use beyond its rated 2-ton capacity and the two-piece handle makes for easy storage.

If durability and quality are important, the 6602ASJ is one of the best aluminum floor jacks available. Like the K Tool 64098A, this was built to last with portability in mind.

24. Hein-Werner HW93642 2-Ton Hydraulic Service Jack

Hein-Werner HW93642 Blue Hydraulic Service Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 99lbs
  • Load Capacity: 2 tons
  • Lift Range: 4-1/2” to 20-1/4”
  • Warranty: 2 years
  • Made in the USA
  • Built for shop use
  • Large saddle
  • Around $405

Like all Hein-Werner jacks, the HW93642 is made in the USA and comes with a 2-year warranty. Likewise, it is built to last and features a cast-iron lift arm and pump base for added strength and durability. With a wide base and large 6-3/4” saddle, the HW93642 will be stable while lifting a load. Large front wheels and rear casters aid in moving it around. The one-piece handle won’t flex under load and provides greater control when lowering the vehicle. An inline pump assembly assures long-life and reduces wear.

While the HW93642 is one of the heavier jacks in this category, it is also one of the most well-built. Made in the USA and backed by a 2-year warranty, Hein-Werner tools are among the best available for a professional mechanic.

25. Powerbuilt 240076 2.5 Ton Fast Lift Floor Jack (Best Overall)

Powerbuilt 240076 Low Profile Fast Lift Floor Jack

Shop Amazon

Key Specifications:

  • Weight and Material: Steel, 74lbs
  • Load Capacity: 2.5 tons
  • Lift Range: 3” to 19-1/2”
  • Warranty: 1-year
  • Good load capacity
  • Low clearance
  • Foot peddle
  • Around $185

The Powerbuilt 240076 low-profile jack features a good load capacity while its 3” minimum clearance can get under the lowest of sports cars. The load capacity of 2.5 tons and maximum lift height of 19-1/2” are quite good as well. Other features to like are a foot peddle which is useful for raising the saddle in tight spots and the Powerbuilt 240076 can reach maximum lift height in just seven pumps. A padded handle and rubber-coated saddle help protect the vehicle. Like most Powerbuilt Tools, this was built with durability in mind and will handle daily shop use. As noted, the 3” clearance will get under most vehicles and the lift height and load capacity are sufficient for use on many light trucks as well. This a solid choice for a shop jack and a good choice for under $200.

Buyer’s Guide

How do I choose a floor jack?
Load Capacity

This largely depends on the type of vehicles you are working on and if it is for shop or home use. Most repair shops will usually have several floor jacks as they work on a wide range of vehicles and 3 tons is probably the minimum capacity you would want to consider. Also, a tire or performance shop would need a low-profile jack for working on lowered vehicles or sports cars. Other considerations for professional use are durability and steel is usually preferred. Obviously, they are heavier but will last longer.

For home use, a 2 to 3-ton jack will be sufficient for most passenger vehicles and light trucks. However, for something heavier like an F-250, a dually, or a work van, a 2 or 3-ton jack won’t cut it. You will probably need a 5-ton, possibly 10 ton for things like an RV. Likewise, you don’t need a 10-ton jack to lift your Honda Civic either. Therefore, it is a good idea to check the Gross Vehicle Weight Rating (GVWR) of the vehicles you are working on before purchasing a floor jack.

Ideally, a jack should have a rated capacity greater than the vehicle’s GVWR. Of course, you are not lifting the entire vehicle at the same time but using a jack at its maximum capacity requires a lot more effort and puts additional stress on the jack itself.

Lifting Range of Floor Jack

Like load capacity, this is another thing to consider when choosing a floor jack. This is largely dependent on the type of vehicles being worked on and the repairs being done. For things like tire changes, brakes, oil changes where you do not need to get under the vehicle this is less important. However, if you need to get under the vehicle this is where the extra clearance comes in handy. The same can be said for a truck that sits higher off the ground. You want to make sure it can at the very least lift the tires off ground.

Aluminum or Steel Floor Jack?

There are several factors to consider here and largely depends on use. Steel, of course, is heavier but more durable and is preferred for jacks that will be used on a daily basis. For example, all of the 5 and 10-ton models are made of steel. A well-constructed steel jack like the Hein-Werner and K Tool will last a lifetime if properly maintained. However, they are heavy with most weighing close to 100lbs. This is not a big deal if it is staying in a garage though as they have wheels and rolling one around is not overly difficult on a flat surface. Having to lift one up, now that’s another story.

While there are some good quality aluminum jacks out there, most are designed for light shop duty and home use. They are ideal for a repair shop or mobile mechanic that does some roadside repairs or house calls. Other than that, even the K Tool and Sunex models are not intended to be a primary shop jack. For home use, aluminum is probably preferred for portability and if maintained properly they should provide years of service.

Parts Availability

This may not be the first thing that comes to mind when purchasing a floor jack but it should be considered. It is often overlooked but there are parts that wear out like the saddle pad and hydraulics. If your floor jack is leaking, lifts slowly, or does not hold a load there is a good chance the piston needs to be rebuilt. For most of the 5 and 10ton jacks, seal kits are available and do not cost more than $120. As to be expected, these are heavy-duty jacks and see a lot more harsh use and will require more servicing. For the 2 and 3-ton jacks, parts availability and price varies by model.

As for which is best in terms of parts availability, seal kits for the SFA jacks (Blackhawk and Hein-Werner) and Torin (Big Red) are readily available and fairly cheap. For the 2 and 3-ton category, it is a bit of a mixed bag. Many of the K Tool, Arcan, and Sunex models the piston assembly is a sealed unit and cannot be serviced. Replacing the piston can be expensive. If you plan on using your jack frequently or keeping it for a long time it is worth checking parts availability and price first.

Frequently Asked Questions

Are floor jacks designed to support the weight of the vehicle?

While a floor jack is designed to lift and support the weight of the vehicle, it should only do so temporarily. What this means is you should not work on a vehicle that is supported by a jack alone. Of course, we have all done it for something quick like changing a tire. With that said, common sense applies here and jack stands should be placed under the vehicle, and under no circumstances should you get under a vehicle supported only by a jack.

What are some things I should check for when my new jack arrives?

The most obvious is to check for any physical damage. This goes without saying as they are heavy and all it takes is one fall or hard drop to break something. The most common trouble spots are bent or cracked casters, which usually results from being dropped. Also, inspect the welds along the frame and make sure there are no cracks. Look for any leaks, which should be fairly obvious. If so, it is probably best to refuse delivery or contact the seller/manufacturer and go from there.

Does it matter where my jack is manufactured?

Like most manufactured goods, the vast majority are made in China or Taiwan. With the exception of some of the cheaper models under $100, they are quality products and there are no major issues with any of them. Some manufacturers like Torin and Sunex have different model lines ranging from low end to professional but that is to be expected.

As for made in the USA, the only jack reviewed here that is made in the USA is Hein-Werner. While the parent company, SFA is based out of Taiwan, the Hein-Werner models are assembled stateside using imported and domestically sourced parts. While they are more expensive than similar jacks of the same specifications, buying a “Made in the USA” product supports American jobs. Not to mention, Hein-Werner is well known for making quality jacks.

Floor Jack maintenance and care

Often overlooked but floor jacks themselves require routine maintenance and care. Here are some tips to ensure your jack will provide years of service.

Inspection of your floor jack

This goes without saying and before use, a quick inspection of the jack should be done. The main things to check are for physical damage. If so, safety first, and the parts or jack should be replaced.

Cleaning and Lubrication

This should be self-explanatory. They are tools and will get dirty no matter how hard you try to avoid it. Coolant or oil may spill on it and things like that will not cause any immediate harm. However, when you are done working on your vehicle, simply wiping down the jack with a clean rag, especially around the hydraulics is sufficient to keep dirt from getting into and damaging the pistons.

Likewise, any of the moving parts like the casters, pivot points on the lift arm, the U-joint on the base of the handle should be lubricated periodically to ensure smooth operation.
Bleeding and Changing the Fluid

If your floor jack takes a lot more effort to lift a vehicle, struggles to reach its maximum lift height, or does not hold a load, chances are the fluid level is low or there is air trapped in the pistons. The first thing to do is to check for any visible oil leaks. If there are any leaks, chances are the seals need to be replaced or the piston itself.

If not, chances are the hydraulics need to be bled. This is a fairly simple procedure that usually involves removing the fill screw on the jack, turning the handle to left, and pumping it multiple times. You may have to do this several times and it is often advised to do it before using a jack for the first time.

Like oil in your car, the fluid in your jack should be changed regularly. If it is used frequently, the general rule is once a year. For light-duty or home use, you can probably get by with every other year.

Storage of your Floor Jack

This goes without saying as jacks are not meant to be stored outside. Water will damage the components. If you are not using it for an extended period of time, it is not a bad idea to keep it covered, especially the hydraulics.

Final Thoughts:

There are plenty of jacks to choose from for all budgets and needs. The above list covers most models available in their respective categories. Choosing a floor jack will largely depend on the type of work being done and vehicles worked on. Starting off with the “big boys”, the 5 and 10- ton jacks, these are all heavy-duty models designed for shop use and will last a lifetime if properly maintained. Unsurprisingly, they are quite heavy, weighing 200lbs or more. For home use, there is little need for a jack of this capacity unless you own a larger vehicle like an F-250, a work van, or a dually. Even then, a 5-ton jack will be more than enough. You do not need a 5-ton jack to lift a 2-ton vehicle.

As for the best in this category, the Big Red 5-ton T80501 and 10-ton T81001 are the cheapest jacks and are fine for home use should you need the capacity. For shop use, the K Tool, ATD, and Sunex, and Hein-Werner are a bit more durable and were built with professional use in mind. As for warranty, all have a 1-year warranty aside from the K Tool and Hein-Werner which comes with a 2-year warranty.

Final Thoughts on 3 Ton Floor Jacks:

Moving to the 3-ton category, there are quite a few models to choose from. For shop use, it is difficult to beat the value offered by the K Tool 63313A or the Arcan XL35. Both cost around $160 and can lift over 3 tons. However, the K Tool does have a 2-year warranty. The Performance Tool W1645 is another solid option with a good 3.5-ton load capacity and low clearance although it is slightly more expensive costing around $200.

For durability and maximum lift height, the Hein-Werner 93652 is worth mentioning although it is the most expensive model in this category. It is arguably the most well-built and durable jack out there. They are a good example of what made in the USA mean. If you break an HW, you are doing something wrong. Not to mention, seal kits are fairly cheap and readily available.

If you are set on a 3-ton aluminum jack, the Sunex 6603ASJ is the way to go. While it is pricey, around $300, which is a good $100 more than an equivalent steel, the old adage “you get what you pay for” applies here. Sunex has reputation for making quality products and this is arguably the best aluminum jack out there. It is portable and weighs a good 40lbs less than a similar steel jack.
For home use with good lift capacity, the Blackhawk B6350 is difficult to beat for the money. Costing around $150 it can lift 3.5 tons with a maximum lift height of 21-1/2”. The only complaint is the 5-1/8” minimum clearance so this will not be a good choice if you own a sports car. Likewise, rebuild kits are cheap and readily available.

Final Thoughts on 2 Ton Floor Jacks:

For 2-ton jacks, there are many to choose from, ranging from less than $100 to high-end aluminum jacks costing $200. While 2-tons is generally low for shop use, there are some good quality models here. However, a 2-ton jack will struggle to lift heavier cars and most trucks.

If you want something durable that will handle regular use, the Sunex 6602LP, K Tool 63101A, and Powerbuilt 240076 are all solid options. For the money, it is difficult to beat the K Tool 63101A, costing $125 and comes with a 2-year warranty. It has good clearance as well and can get under most sports cars. The Sunex 6602LP has the lowest clearance of any jack reviewed here but it is a bit pricey considering the load capacity. If you prefer aluminum, there are several to choose from. The K Tool 63098A and Sunex 6602ASJ are very similar in specs and price. If I had to choose one, I’d opt for the K Tool mainly due to the fact it is lighter than the Sunex and comes with a 2-year warranty.

The Powerbuilt 240076 is another good option if you are working in tight spaces as it has a foot peddle that can be used to raise the saddle. Not to mention, it has a low 3” clearance as well.
Going down the list to budget jacks, the Performance Tool W1611 and JEGS 79000 are as cheap as it gets. However, these were intended for light repairs like changing a tire or brakes. Costing less than $100 you shouldn’t have high expectations. However, they are small and portable and are perfect for taking to a track event if you need to change out your wheels and tires. They are also good upgrades over the OEM scissor jack. Other than that, if you plan on working on your vehicle regularly for another $100 you can get a much better jack.

Conclusion

Lastly, it is worth mentioning parts availability for the jacks in this category, namely the seal and piston kits. In my experience, these are the most common things that need to be replaced on a jack and for some models, they can be expensive or not available.

This is the biggest gripe with the Sunex and K Tool jacks, the pistons are sold as a complete assembly and they cost about as much as the jack itself. For some of the Performance Tool and Powerbuilt, kits may not be available so it is worthwhile to check first.

As for the Hein-Werner, Blackhawk, and Big Red jacks, seal kits are available and are fairly cheap. While a Hein-Werner may cost more upfront, the rebuild kit is around $50 compared to $140 for a piston assembly on many of the Arcan and K Tool jacks. If you plan on using your jack regularly it might be worth pricing out replacement parts. Likewise, it highlights the importance of maintaining your jack, keeping it clean, and changing the fluid regularly.

With that said, the objective of this guide is to assist you in deciding which floor jack best suits your needs with an emphasis on quality, features, load range, and durability. We hope we have done our job of providing leading information on these products to help you choose the right floor jack. Please feel free to comment below on any experiences you might have on some of the products listed, or, leave us feedback on products that you think belong on this list!

Leave a Comment